Motility Test Medium Butt

As low as ₹1,133.00
Availability: In stock
Only %1 left
SKU:
SL201


Intended Use

Recommended for detection of bacterial motility.

Composition

Ingredients Gms / Litre
Tryptose 10.000
Sodium chloride 5.000
Agar 5.000
Final pH (at 25°C) 7.2±0.2

Formula adjusted, standardized to suit performance parameters

Directions

Streak the test inoculum aseptically into the slant and incubate at appropriate conditions. Incubate the slants at 30-35°C for 18-24 hours.

Principle and Interpretation

Bacterial motility can be observed directly on microscopic slide or it can be visualized on motility media having agar concentration of 0.4% or less (4). Use of such semisolid media to observe or detect motility was reported by Tittsler and Sandholzer (6). Motility Test Medium is a modification of their formulation. Motility can be visualized as a diffused zone of growth flaring out from the line of inoculation (4). Hanging-drop technique in motility tests has practical difficulties, which is efficiently eliminated by use of culture-based methods using semi-solid media, as in semisolid media; the results obtained are macroscopic and cumulative.

Tryptose serve as a source of essential growth nutrients required for bacterial metabolism. Sodium chloride maintains the osmotic equilibrium of the medium. Small amount of agar helps to create a semisolid medium.

Bacterial motility can be observed directly by examination of the tubes following incubation. Inoculation is done by stabbing through the centre of the medium. Incubate at appropriate temperature for 18-40 hours. Non-motile organisms grow only along the line of inoculation whereas motile organisms grow away from the line of inoculation or may show growth even throughout the medium. All weak or equivocal motility results should be confirmed by flagellum stain or by direct wet microscopy (hanging drop) (1,5).

Type of Specimen

Isolated microorganism

Specimen Collection and Handling

With inoculating needle, stab centre of medium to approximately one-half of depth.(4) After use, contaminated materials must be sterilized by autoclaving before discarding.

Warning and Precautions

Read the label before opening the container. Wear protective gloves/protective clothing/eye protection/ face protection. Follow good microbiological lab practices while handling specimens and culture. Standard precautions as per established guidelines should be followed while handling specimens. Safety guidelines may be referred in individual safety data sheets.

Limitations

  1. Growth from an 18-24 hr pure culture should be used. (5)
  2. All weak or equivocal motility results should be confirmed by flagellum stain or by direct wet microscopy (hanging drop) (1,5).

Performance and Evaluation

Performance of the medium is expected when used as per the direction on the label within the expiry period when stored at recommended temperature.

Quality Control

Appearance: Sterile Motility Test Medium Butt in glass tube.

Colour of medium: Cream to yellow coloured medium

Quantity of medium: 8ml of medium in glass tube

Reaction: 7.00-7.40

Sterility Test: Passes release criteria

Cultural Response

Cultural characteristics observed after an incubation at 35 - 37°C for 18-48 hours.

Organism Inoculum (CFU) Growth Motility
Escherichia coli ATCC 25922 (00013*) 50-100 luxuriant positive, growth away from stabline causing turbidity
# Klebsiella aerogenes ATCC 13048 (00175*) 50-100 luxuriant positive, growth away from stabline causing turbidity
Klebsiella pneumoniae ATCC 13883 (00097*) 50-100 luxuriant negative, growth along the stabline, surrounding medium remains clear
Salmonella Enteritidis ATCC 13076 (00030*) 50-100 luxuriant positive, growth away from stabline causing turbidity
Staphylococcus aureus subsp. aureus ATCC 25923 (00034*) 50-100 luxuriant negative, growth along the stabline, surrounding medium remains clear

Key: (*) Corresponding WDCM numbers.
(#) Formerly known as Enterobacter aerogenes

Storage and Shelf Life

On receipt store between 2-8°C Use before expiry date on the label. Product performance is best if used within stated expiry period.

Disposal

User must ensure safe disposal by autoclaving and/or incineration of used or unusable preparations of this product. Follow established laboratory procedures in disposing of infectious materials and material that comes into contact with sample must be decontaminated and disposed of in accordance with current laboratory techniques (2,3).

More Information
Product Name Motility Test Medium Butt
SKU SL201
Customized Product Available No
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account