Plot No. C40, Road No. 21Y, MIDC, Wagle Industrial Estate,
Thane(W)-400604, MH, India.
Your enquiry has been submitted
Something problem with the server. Try again.
HiPetriSlim™ HiCrome™ YM Count
Recommended for the determination of total yeast and mould count in food, dairy, water and waste water samples using chromogenic medium.
Your enquiry has been submitted
Please login to Post an Enquiry.
Ready Prepared Kits#4fa25a
Intended use
Recommended for the determination of total yeast and mould count in food, dairy, water and waste water samples using chromogenic medium.
Composition
Proprietary
Formula adjusted, standardized to suit performance parameters
Directions
Open the pouch aseptically. Open the lid and add the required dilution of 0.5 ml to 1 ml. The solution will be evenly absorbed. Close the lid. Press the sides of the lid to ensure that it is fixed in the grooves. Allow 5-10 minutes for even absorption. Incubate the plates in horizontal position at specified temperature and period. After incubation, count the number of colonies which have appeared on the surface of the medium.
Principle And Interpretation
HiPetriSlim™ HiCrome™ YM Count is differential medium, which facilitates rapid isolation of yeasts from mixed cultures and allows differentiation of Candida species. The medium is highly nutritious and provides amino acids and long chain peptides for the growth of Candida. One chromogenic substrate is specifically cleaved by Candida albicans by enzyme beta-N-acetyl-galactosaminidase to give green colour colonies. Other Candida species cleaves the other chromogenic substrate to give purple colonies
Salient features :
- Recommended for testing liquid samples
- Widespread Industrial application (Water, Food, Dairy & Cosmetics)
- Compact packing reduces storage space
- No Preparation time
- User-friendly, ready-to-use products
- Available in wide range of products that can be customized as per requirement
Type of specimen
Food and dairy industries, Cosmetic industries, Water and waste water testing laboratories, Other industries, laboratories where microbiological work is carried out.
Specimen Collection and Handling
Refer directions.
After use, contaminated materials should be autoclave at 121°C for 15 minutes before discarding.
Warning and Precautions
Read the label before opening the container. Wear protective gloves/protective clothing/eye protection/ face protection. Follow good microbiological lab practices while handling specimens and culture. Standard precautions as per established guidelines should be followed while handling specimens. Safety guidelines may be referred in individual safety data sheets.
Limitations
- Do not use diluents containing citrate, bisulfite or thiosulfate; they can inhibit growth.
- Individual organisms differ in their growth requirement and may show variable growth patterns on the medium.
- Each lot of the medium has been tested for the organisms specified on the COA. It is recommended to users to validate the medium for any specific microorganism other than mentioned in the COA based on the user's unique requirement.
Performance and Evaluation
Performance of the medium is expected when used as per the direction on the label within the expiry period when stored at recommended temperature.
Quality Control
Appearance: Sterile plastic plate containing cream to white nutrient pad
Sterility Check: Passes release criteria.
Cultural Response:
Cultural characteristics observed after an incubation at 30-35°C for 40-48 hours.
| Organism | Inoculum (CFU) | Growth | Colour of Colony |
|---|---|---|---|
| Candida albicans ATCC 10231 (00054*) | 50-100 | good-luxuriant | light green |
| Candida glabrata ATCC 15126 | 50-100 | good-luxuriant | cream to white |
| #Teunomyces krusei ATCC 24408 | 50-100 | good-luxuriant | purple, fuzzy |
| Candida tropicalis ATCC 750 | 50-100 | good-luxuriant | blue to purple |
Key: (*) Corresponding WDCM numbers, (#) - Formerly known as Candida krusei
Storage and Shelf Life
Store between 2-8°C. Use before expiry date on the label. Product performance is best if used within stated expiry period.
Disposal
User must ensure safe disposal by autoclaving and/or incineration of used or unusable preparations of this product. Follow established laboratory procedures in disposing of infectious materials and material that comes into contact with sample must be decontaminated and disposed of in accordance with current laboratory techniques (1,2).
| Product Name | HiPetriSlim™ HiCrome™ YM Count |
|---|---|
| SKU | HPS006 |
| Customized Product Available | No |
Write Your Own Review