Ecopathology Uro Kit - 2 (One kit is sufficient for 5 samples)

As low as $0.00
Availability: Out of stock
Availability: In stock
Only %1 left
SKU:
K085A


Download Catalogue

Kit Contents**

  • a. HiCrome™ UTI Agar (SM1353): 1x100ml
  • b. Mueller Hinton Agar (SM173): 3x100ml
  • c. Sterile Petri plates: (Empty 90 mm) - 5 Nos (for SM1353) & 120 mm-10Nos for (SM173)
  • d. Octodiscs OD066 - 5 Nos, OD067-5 Nos, (Each OD is a combination of 8 different antibiotics)
  • e. Sterile Uricol : 5 Nos.

Directions

  1. Collect the midstream urine sample in sterile uricol.
  2. Process the samples as per the protocol.
  3. SM1353 and SM173-Slightly loosen the cap and melt the medium in water bath at 100°C. Cool to 45-50°C and pour the medium into empty sterile 90 mm Petri plates.
  4. Isolate the organisms from the urine sample on HiCrome™ UTI Agar plate prepared from SM1353. Incubate at 35-37°C for 18-24 hours.
  5. The most predominant organism (causative agent) is then selected for sensitivity study.
  6. 0.1 OD colony suspension of the suspected organism is prepared and then swabbed on Mueller Hinton Agar plates plate prepared from SM173.
  7. Place OD066 and OD067 on the swabbed plates. Incubate at 35-37°C for 18-24 hours.
  8. Interpret the results after incubation.

Principle And Interpretation

Urinary tract infections are bacterial infections affecting parts of urinary tract. The common symptoms of urinary tract infection are urgency and frequency of micturition, with associated discomfort or pain. The common condition is cystitis, due to infection of the bladder with a uropathogenic bacterium, which most frequently is Escherichia coli, but sometimes Staphylococcus saprophyticus or especially in hospital-acquired infections, Klebsiella species, Proteus mirabilis, other coliforms, Pseudomonas aeruginosa or Enterococcus faecalis (1). HiCrome™ UTI Agar is also recommended for dip stick procedures and as dip inoculum transport medium for urine specimens. Inoculate the medium immediately after urine collection (5, 2). After isolation of the organism sensitivity of the organism to antimicrobial agents is checked on Mueller Hinton Agar by disc diffusion method as described in CLSI Approved Standard (6). The susceptibility is determined by comparing with CLSI standards (7). For Susceptilbility testing Octodiscs OD066, OD067 are used. These series of discs gives the privilege to study large number of antibiotics at one time.

Type of specimen

Clinical samples - urine

Specimen Collection and Handling:

For clinical samples follow appropriate techniques for handling specimens as per established guidelines (3,4). After use, contaminated materials must be sterilized by autoclaving before discarding.

Warning and Precautions :

In Vitro diagnostic Use only. Read the label before opening the container. Wear protective gloves/protective clothing/eye protection/face protection. Follow good microbiological lab practices while handling specimens and culture. Standard precautions as per established guidleines should be followed while handling clincal specimens. Saftey guidelines may be referred in individual safety data sheets.

Limitations :

  1. Initiation of antibiotic therapy, before collection of sample, low urine pH (less than 5) etc. may result in low bacterial count from infected patients.
  2. This medium is recommended for susceptibility testing of pure cultures only.
  3. Inoculum density may effect the zone size. Heavy inoculum may result in smaller zones or too less inoculum may result in bigger zones.
  4. As antimicrobial susceptibility is carried with antibiotic disc, proper storage of the disc is desired which may effect the potency of the disc.

Performance and Evaluation

Performance of the medium is expected when used as per the direction on the label within the expiry period when stored at recommended temperature.

Quality Control

Appearance

SM1353: Sterile glass bottle conataining slightly opalescent HiCrome™ UTI Agar

SM173: Sterile glass bottle conataining slightly opalescent Mueller Hinton Agar

OD066 or OD067: Flat circular ring of inert material w/ 8 equidistant arms on the outer periphery, each arm having a 6 mm disc at the end; each disc impregnated w/ different antibiotics, w/ corresponding symbols & concentrations printed on the ring.

Colour

SM1353: Light amber coloured

SM173: Light amber coloured medium.

pH

SM1353: 6.60-7.20

SM173: 7.20-7.40

Sterility test

Passes release criteria

Cultural Response

SM1353: Cultural characteristics observed after melting the medium and pouring into sterile Petri plates. The plates are inoculated with the specimen and incubated at 35-37°C for 18-24 hours.

Organism Inoculum (CFU) Growth Recovery Colour of Colony
Enterococcus faecalis ATCC 29212 (00087*) 50-100 good-luxuriant >=70% slight yellowish or greenish
Escherichia coli ATCC 25922 (00013*) 50-100 good-luxuriant >=70% yellow, opaque, centre slightly deeper yellow
Klebsiella pneumoniae ATCC 13883 (00097*) 50-100 good-luxuriant >=70% yellow to whitish blue
Proteus vulgaris ATCC 13315 50-100 good-luxuriant >=70% blue
Salmonella Typhi ATCC 6539 50-100 good-luxuriant >=70% bluish

SM173: Cultural characteristics observed after melting the medium and pouring into sterile Petri plates. The plates are inoculated with the isolated test organisms by swabbing and placing the Octodiscs OD066 & OD067 and incubated at 35-37°C for 18-24 hours.
The following average diameter of zone of inhibition is observed for standard cultures as per CLSI.

OD066

Each ring of OD066 contains

Antibiotic Concentration
Cefoperazone (CPZ) 75µg
Cefpodoxime (CPD) 10µg
Ceftazidime (CAZ) 30µg
Cefepime (CPM) 30µg
Meropenem (MRP) 10µg
Gentamicin (GEN) 10µg
Amikacin (AK) 30µg
Moxifloxacin (MO) 5µg
Organisms(ATCC) Antibiotic Std.Zone of diameter(mm)
Escherichia coli ATCC 25922 (00013*) Cefaperazone CPZ (75mcg) 28-34 mm
Cefpodoxime CPD (10mcg) 23-28 mm
Ceftazidime CAZ (30mcg) 25-32 mm
Cefepime CPM (30mcg) 31-37 mm
Meropenem MRP (10mcg) 28-34 mm
Gentamicin GEN (10mcg) 19-26 mm
Amikacin AK (10mcg) 19-26 mm
Moxifloxacin MO (5mcg) 28-35 mm
Staphylococcus aureus subsp aureus ATCC 25923 (00034*) Cefaperazone CPZ (75mcg) 24-33 mm
Cefpodoxime CPD (10mcg) 19-25 mm
Ceftazidime CAZ (30mcg) 16-20 mm
Cefepime CPM (30mcg) 23-29 mm
Meropenem MRP (10mcg) 29-37 mm
Gentamicin GEN (10mcg) 19-27 mm
Amikacin AK (10mcg) 20-26 mm
Moxifloxacin MO (5mcg) 28-35 mm
Pseudomonas aeruginosa ATCC 27853 (00025*) Cefaperazone CPZ (75mcg) 23-29 mm
Ceftazidime CAZ (30mcg) 22-29 mm
Cefepime CPM (30mcg) 24-30 mm
Meropenem MRP (10mcg) 27-33 mm
Gentamicin GEN (10mcg) 16-21 mm
Amikacin AK (10mcg) 18-26 mm
Moxifloxacin MO (5mcg) 17 -25 mm

OD067

Each ring of OD067 contains

Antibiotic Concentration
Ampicillin (AMP) 10µg
Cefazolin (CZ) 30μg
Nalidixic acid (NA) 30µg
Norfloxacin (NX) 10µg
Ciprofloxacin (CIP) 5µg
Co-Trimoxazole (COT) 25µg
Levofloxacin (LE) 5µg
Nitrofurantoin (NIT) 300µg
Organisms(ATCC) Antibiotic Std.Zone of diameter(mm)
Escherichia coli ATCC 25922 (00013*) Ampicillin AMP (10mcg) 16 -22 mm
Cefazolin CZ (30mcg) 23 -29 mm
Nalidixic acid NA (30mcg) 22 -28 mm
Norfloxacin NX (10mcg) 28 -35 mm
Ciprofloxacin CIP (5mcg) 30 -40 mm
Co-Trimoxazole COT (25mcg) 23 -29 mm
Levofloxacin LE (5mcg) 29 -37 mm
Nitrofurantion NIT (300mcg) 20 -25 mm
Staphylococcus aureus subsp aureus ATCC 25923 (00034*) Ampicillin AMP (10mcg) 27 -35 mm
Cefazolin CZ (30mcg) 29 -35 mm
Norfloxacin NX (10mcg) 17 -28 mm
Ciprofloxacin CIP (5mcg) 22 -30 mm
Co-Trimoxazole COT (25mcg) 24 -32 mm
Levofloxacin LE (5mcg) 25 -30 mm
Pseudomonas aeruginosa ATCC 27853 (00025*) Norfloxacin NX (10mcg) 22 -29 mm
Ciprofloxacin CIP (5mcg) 25 -33 mm
Levofloxacin LE (5 mcg) 19 -26 mm

Key: (*) Corresponding WDCM numbers.

Storage and Shelf Life

Store between 2-8°C.Use before expiry date on the label. On opening, product should be properly stored dry ventilated area protected from extremes of temperature and sources of ignition. Product performance is best if used within stated expiry period.

Disposal

User must ensure safe disposal by autoclaving and/or incineration of used or unusable preparations of this product. Follow established laboratory procedures in disposing of infectious materials and material that comes into contact with clinical sample must be decontaminated and disposed of in accordance with current laboratory techniques (3,4).

More Information
Product Name Ecopathology Uro Kit - 2 (One kit is sufficient for 5 samples)
SKU K085A
Customized Product Available No
Write Your Own Review
You're reviewing:Ecopathology Uro Kit - 2 (One kit is sufficient for 5 samples)