CO2 incubators provide an optimal cell growth environment by maintaining a humidified atmosphere with temperature and carbon dioxide control. The contamination reducing features of AI006HSUV provides optimal cell growth, valuable contamination control technologies, and advanced design for highly critical cell culture applications. It is equipped with dual sterilization modes: a 125°C dry air sterilization cycle and sterilization by UV method.
Technical Data Sheet (TD)
CellIX® CO2 incubator, 180L, with dry heat sterilization unit (125°C) and UV Sterilization unit, 4W
Safety Data Sheet (SDS)
CellIX® CO2 incubator, 180L, with dry heat sterilization unit (125°C) and UV Sterilization unit, 4W
Electronic Instructions for Use (eIFU)
CellIX® CO2 incubator, 180L, with dry heat sterilization unit (125°C) and UV Sterilization unit, 4W
CellIX® CO2 incubator, 180L, with dry heat sterilization unit (125°C) and UV Sterilization unit, 4W
CO2 incubators provide an optimal cell growth environment by maintaining a humidified atmosphere with temperature and carbon dioxide control. The in-built HEPA filters in CellIx™, AI006HSUV continuously filter the chamber air volume. It is equipped with dual sterilization modes: a 125°C dry air sterilization cycle and sterilization by UV method. Heating is automatically cut by safety device when temperature control fails or there is excessive heating over set point. All 6 sides of the chamber are covered with heating wires which bring about uniform heating and provides fast heatup & temperature recovery. Incubator sterilization can be performed with a 4W UV lamp. The UV light doesn't reach the samples and sterilization can be performed during operation. It is optionally available with copper oxide chamber instead of the traditional stainless steel. Copper has natural bactericidal & fungicidal properties. All these features of CellIx™, AI006HSUV makes it an ideal incubator for the research labs.