B.T.B. Lactose Agar

As low as €0.00
Availability: In stock
Only %1 left
SKU:
M861
Used for detection and isolation of pathogenic Staphylococci.


Intended Use

Recommended for isolation of pathogenic Staphylococci from clinical sample.

Composition**

Ingredients g/L
Proteose peptone 5.000
HM peptone B# 3.000
Lactose 10.000
Bromo thymol blue 0.170
Agar 15.000
Final pH (at 25°C) 8.6±0.2

**Formula adjusted, standardized to suit performance parameters

# Equivalent to Beef extract

Directions

Suspend 33.17 grams in 1000 ml purified/distilled water. Heat to boiling to dissolve the medium completely. Sterilize by autoclaving at 15 lbs pressure (121°C) for 15 minutes. Cool to 45-50°C. Mix well and pour into sterile Petri plates.

Principle And Interpretation

Staphylococcus are known to be pathogenic to man and other mammals. Although this organism is frequently a part of the normal human microflora, it can cause significant opportunistic infections under appropriate conditions (1). Traditionally Staphylococci are divided into two groups on the basis of their ability to clot blood plasma (the coagulase reaction). The coagulase-positive Staphylococci constitute the most pathogenic species, Staphylococcus aureus. BTB Lactose Agar (2) designed by Chapman et al (3), is used in the detection and isolation of pathogenic Staphylococci. On this media Staphylococci are differentiated by their ability to grow at a high pH and in the presence of bromothymol blue. Proteose peptone and HM peptone B serves as a source of carbon, nitrogen, long chain amino acids, vitamins and other essential nutrients. Lactose is the fermentable carbohydrate with bromothymol blue as an indicator. Plates should be inoculated preferably by spread plate technique and incubated for about 36 hours at 35°C. Typical colonies appear deep yellow (90% approx.) or blue grey (10% approx.). Coliforms may grow but are differentiated by their appearance.

Type of specimen

Clinical samples : Skin and mucous membranes

Specimen Collection and Handling

For clinical samples follow appropriate techniques for handling specimens as per established guidelines (4,5).

After use, contaminated materials must be sterilized by autoclaving before discarding.

Warning and Precautions

In Vitro diagnostic use only. For professional use only. Read the label before opening the container. Wear protective gloves/protective clothing/eye protection/face protection. Follow good microbiological lab practices while handling specimens and culture. Standard precautions as per established guidelines should be followed while handling clinical specimens. Safety guidelines may be referred in individual safety data sheets.

Limitations

  • Individual organisms differ in their growth requirement and may show variable growth patterns on the medium.
  • Each lot of the medium has been tested for the organisms specified on the COA. It is recommended to users to validate the medium for any specific microorganism other than mentioned in the COA based on the user's unique requirement.

Performance and Evaluation

Performance of the medium is expected when used as per the direction on the label within the expiry period when stored at recommended temperature.

Quality Control

Appearance
Cream to greenish yellow homogeneous free flowing powder

Gelling
Firm, comparable with 1.5% Agar gel

Colour and Clarity of prepared medium
Greenish blue coloured, clear to slightly opalescent gel forms in Petri plates

Reaction
Reaction of 3.32% w/v aqueous solution at 25°C. pH : 8.6±0.2

pH
8.40-8.80

Cultural Response
Cultural characteristics observed after an incubation at 35-37°C for 24-48 hours.

Organism Inoculum (CFU) Growth Recovery Colour of colony
Escherichia coli ATCC 25922 (00013*) 50-100 good-luxuriant >=70% yellow
Staphylococcus aureus subsp. aureus ATCC 25923 (00034*) 50-100 good-luxuriant >=70% golden yellow
Salmonella Typhi ATCC 6539 50-100 good-luxuriant >=70% blue/colourless
Staphylococcus aureus subsp. aureus ATCC 6538 (00032*) 50-100 good-luxuriant >=70% golden yellow
Staphylococcus epidermidis ATCC 12228 (00036*) 50-100 good-luxuriant >=70% blue/colourless

Key: *Corresponding WDCM numbers.

Storage and Shelf Life

Store between 10-30°C in a tightly closed container and the prepared medium at 20-30°C. Use before expiry date on the label. On opening, product should be properly stored dry, after tightly capping the bottle in order to prevent lump formation due to the hygroscopic nature of the product. Improper storage of the product may lead to lump formation. Store in dry ventilated area protected from extremes of temperature and sources of ignition Seal the container tightly after use. Product performance is best if used within stated expiry period.

Disposal

User must ensure safe disposal by autoclaving and/or incineration of used or unusable preparations of this product. Follow established laboratory procedures in disposing of infectious materials and material that comes into contact with clinical sample must be decontaminated and disposed of in accordance with current laboratory techniques (4,5).

More Information
Product Name B.T.B. Lactose Agar
SKU M861
Product Type Regular
Physical Form Powder
Origin Animal
Packaging type HDPE
References 1. Carney D. N., Fossieck B. E., Parker R. H. et al, 1982, Rev. Infect. Dis. H., 1-12.2.Atlas R. M., 2004, Handbook of Microbiological Media, 3rd Edition,CRC Press.3.Chapman, Lieb, Bereus and Curcio, 1937, J. Bacteriol., 33:533.
Customized Product Available No
Write Your Own Review
You're reviewing:B.T.B. Lactose Agar

Upsell Products