Antibiotic Assay Medium E

Availability: Out of stock
Availability: Out of stock
Only %1 left
SKU:
ME1347
For microbiological assay of Neomycin sulphate and Framycetin sulphate using Bacillus subtilis and Bacillus pumilus in accordance with European Pharmacopoeia.


Intended Use

For microbiological assay of Framycetin Sulphate and Neomycin sulphate using Bacillus subtilis and/or Bacillus pumilus in accordance with European Pharmacopoeia.

Composition

Ingredients Gms / Litre
Peptone 5.000
Disodium hydrogen phosphate, 12H₂O 26.900
Meat extract 3.000
Agar 10.000
pH after sterilization 7.9±0.1

Formula adjusted, standardized to suit performance parameters

Directions

Suspend 28.67 grams of dehydrated medium powder in 1000 ml R-water/ purified/distilled water. Heat to boiling to dissolve the medium completely. Sterilize by autoclaving at 15 lbs pressure (121°C) for 15 minutes. Adjust the pH of the medium, using freshly prepared buffer solution as recommended by the European pharmacopoeia for the antibiotic assayed.

Advice: Recommended for the microbiological assay of Framycetin Sulphate and Neomycin sulphate

Principle And Interpretation

This medium is formulated in accordance to European Pharmacopoeia (1).This medium is widely used for as seed agar in plate assay of Framycetin sulphate and Neomycin sulphate using Bacillus subtilis and/or Bacillus pumilus as test organism.

Peptone and meat extract supply nutrients essential for microbial growth. Phosphates are incorporated in the medium to provide good buffering action. The low concentration of agar facilitates proper diffusion of antibiotic in the seed agar.

Freshly prepared plates should be used for antibiotic assays. Test organisms are inoculated in sterile seed agar cooled to 40-45°C and spread evenly over the surface of solidified base agar. Zones of inhibition around the antibiotic are then measured. All conditions in the microbiological assay must be controlled carefully. The use of standard culture media in the test is one of the important steps for good results.

Quality Control

Appearance: Cream to yellow homogeneous free flowing powder

Gelling: Firm, comparable with 1.0% Agar gel.

Colour and Clarity of prepared medium: Light yellow coloured clear to slightly opalescent gel forms in Petri plates.

pH: 7.80-8.00

Cultural Response

ME1347: Cultural characteristics observed after an incubation at 35-37°C for 18-24 hours.

Organism Inoculum (CFU) Growth Recovery Antibiotics assayed
Bacillus pumilus NCTC 8241 50-100 luxuriant >=70% Framycetin sulphate, Neomycin sulphate
Bacillus subtilis ATCC 6633 50-100 luxuriant >=70% Neomycin sulphate and Framycetin sulphate

Storage and Shelf Life

Store below 30°C in tightly closed container and use freshly prepared medium. Use before expiry date on the label.

More Information
Product Name Antibiotic Assay Medium E
SKU ME1347
Product Type Regular
Physical Form Powder
Origin Animal
Packaging type HDPE
References 1. British Pharmacopoeia, 2009, The Stationery office British Pharmacopoeia2.European Pharmacopoeia, 2009, European Department, for the Quality of Medicines.
Customized Product Available No
Write Your Own Review
You're reviewing:Antibiotic Assay Medium E
Your Rating