HiTouch™ Selective Yeast and Mould Count Flexi Plate™

As low as ₹6,956.00
Availability: In stock
Only %1 left
SKU:
FL010


Intended Use

For enumeration (count) of yeasts and moulds.

Composition**

Ingredients Gms / Litre
Biopeptone 10.000
Yeast extract 9.000
Dextrose 50.000
Magnesium sulphate 2.100
Potassium phosphate 2.000
Diastase 0.050
Thiamine hydrochloride 0.050
Indicator dye 0.026
Agar 15.000
Final pH (at 25°C) 4.6±0.2

**Formula adjusted, standardized to suit performance parameters

Directions

Open the pouch in the protected area. Remove the wrappping and open the lid and carefully lift up the enclosed prepared medium plate so as to avoid touching the agar surface by hand.Touch the surface of agar plate onto the surface to be tested. Gently press the plate manually for upto 10 sencond. Apply constant and uniform pressure to the whole surface (ensuring that an even pressure of 25 gm/cm2 is distributed over the whole plate for 10 seconds). Replace exposed medium plate back in the base plate. Close the lid. Press the sides of the lid to make sure that it is fixed in the grooves. Disinfect the surface where the sample was taken in order to remove any possible traces of agar. Incubate the plates at specified temperature. After incubation as recommended count the number of colonies which have appeared on the surface of medium. Alternative Methods of Inoculation: To use as Culture Plate (ii), Sample Dilution Plate (iii) or Swabbing Plate (iv) To use as Gravitation Settling Plate (v)

Principle And Interpretation

Hitouch Flexi Plates are specially developed for the microbial testing in food , pharmaceutical, cosmetic, dairy, hospitals, water works, environmental testing etc. These plates are handy and ready to use sterile media supplied in flexible disposable plates, 55 mm in diameter. It is grid scored on the base and is irradiated to ensure perfect sterility. Medium is filled aseptically and each plate is packed in pre-sterilized plastic bag. Hitouch Flexi Plateis then packed in plastic pouch wrapping. The unique flexible plate configuration ensures close contact even with uneven surfaces. Where not only counts are obtained but it is also possible select and differentiate between groups of microorganisms like yeasts and moulds. these plates are specially developed microbial testing, The Flexi plate medium formula is suitable for enumeration of yeast and mould (fungal population) grids enable direct reading on the plates of the number of colonies per cm2.

Quality Control

Appearance: Sterile plastic plate containing Green coloured firm gel

Quantity of Medium: 9ml of gel in plastic plate

Reaction: 4.40-4.80

Sterility test

Passes release criteria

Cultural response

Cultural characteristics was observed after incubation at 22-28°C for 48-72 hours.

Organism Growth Colour of Colony
Saccharomyces cerevisiae ATCC 9763 Good-luxuriant Greenish white
Candida albicans ATCC 10231 Luxuriant Greenish white

Storage and Shelf Life

Store between 2-8°C. Use before expiry date on the label.

More Information
Product Name HiTouch™ Selective Yeast and Mould Count Flexi Plate™
SKU FL010
Customized Product Available No
Write Your Own Review
You're reviewing:HiTouch™ Selective Yeast and Mould Count Flexi Plate™
Your Rating